RP-7100 drehzahl irregular

Moderator: Applause

Antworten
dorenberg
Ist gelegentlich hier
Beiträge: 15
Registriert: 20.01.2017, 14:08

RP-7100 drehzahl irregular

Beitrag von dorenberg »

Hallo leute,

Ich habe seit einen zeit einen Rp-7100 und hat ein problem das das drehzahl irregular ist wenn den Quartz eingeschaltet ist. Ich hab mal versucht via den service manual um das drehzahl aus zu richten mit den poti's aber war nicht erfolgreig.

Hat jemand ideeen?

Gruss Dorenberg.

(aus die Niederlande, deshalb nicht so ganz gut Deutsch.....)
Sleepy
Inventar
Beiträge: 156
Registriert: 03.01.2012, 11:58

Re: RP-7100 drehzahl irregular

Beitrag von Sleepy »

Hi,

that behavior is correct. If "quartz"-button is pressed (the "quatz"-LED glows), the two "pitch"-trimmer have no effect on the revolution speed; speed is fixed to 33 or 45rpm, depending on the "speed"-button.

If the fixed speed ("quartz"-button pressed) is not correct, maybe there´s a pot inside the player to correct that. For this, a look at the service-manual would be helpfull.

If "quartz"-button is not pressed, you can choose 33/45rpm with the "speed"-button AND vary speed with the matching "pitch"-pot at the front end.

In both cases, you should see red lines in the little window right beside the "quartz"-button.

Sleeπ
Play ATARI and drive Capri. :-)
dorenberg
Ist gelegentlich hier
Beiträge: 15
Registriert: 20.01.2017, 14:08

Re: RP-7100 drehzahl irregular

Beitrag von dorenberg »

Hi Sleepy,

thanks for the answer. But even with the quartz funtion ON, you can hear some speed variations. I tried to adjust it, but brought the turntable to a repair shop.

Kind regards,
dorenberg
Sleepy
Inventar
Beiträge: 156
Registriert: 03.01.2012, 11:58

Re: RP-7100 drehzahl irregular

Beitrag von Sleepy »

O.K., you´re right - that´s certainly not correct... ;-)

If the find the fault, let us know what causes this effect - maybe it´s helpfull for another user.

Good luck, Sleepy
Play ATARI and drive Capri. :-)
dorenberg
Ist gelegentlich hier
Beiträge: 15
Registriert: 20.01.2017, 14:08

Re: RP-7100 drehzahl irregular

Beitrag von dorenberg »

It is still in the repair shop. But as soon as I know what was the cause I will post it here.
Antworten